Titanium Crucible
Titan: Start out with a low temp. 440F Medium Speed, 30 Second Sesh. From there you can move up if needed but we recommend staying below 465F for flavor.
Magnum: Start at 440F (potentially as low as 430F with a low Sync) 30 Second run time.
You can bump up to a 60 second run time if you have enough loaded. Otherwise stick to the 30 second Sesh for titanium.
Flavor Rating: 3.7 / 5.0
-----------------------------------------------------------------
Quartz Crucible
Titan: Start out with a Medium temp around 470F, no higher then 500F for 60 seconds.
Magnum: 470F starting temp Medium for 60 seconds. Go up or down as needed but no higher then 500F
Flavor Rating: 4.0 / 5.0
-----------------------------------------------------------------
Ceramic Crucible
Titan: Recommended settings of 460F Medium 60 Seconds. 30 Seconds may work depending on load size. Try to stay under 490F for flavor.
Magnum: Starting temp of 450F Medium for 60 to 30 seconds depending on load size and sync.
Flavor Rating 4.0 / 5.0
-----------------------------------------------------------------
SiC Crucible
Titan: Recommended settings of 440F Medium 60 Seconds. Stay below 480F for best experience.
Magnum: 430F Medium for 60 seconds for premium flavor. Stay below 470F.
Flavor Rating 4.75 / 5.0
For Fadespace SiC: We recommend a starting temp of 460F and a run time of 90 seconds with a Slow heat-up. Gradually increase the temp as needed.
-----------------------------------------------------------------
AlN Crucible
Titan: Recommended settings of 445F Medium 60 Seconds. Stay below 480F for best experience.
Magnum: N/A
Flavor Rating 5.0 / 5.0
For Fadespace S-Tier: We recommend a starting temp of 475F and a run time of 90 seconds, with a Slow heat-up. Gradually increase the temp as needed.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article