JOLT DIP & RIP USER GUIDE
Important Tip:
Brushing your tip into your concentrate works best. Try to avoid pushing directly in, this is not good for your coil or your wax.
Quick Start:
5 Clicks to Turn the Jolt on or off.
3 Clicks to change the heat level.
2 Clicks to activate auto pre-heat mode.
1 Click and Hold to activate manual fire.
Preheat Info:
- The auto pre-heat mode runs for 2 seconds. This can be especially useful in colder climates and to help clear minor clogs the can happen with usage.
Cleaning Your Jolt:
We recommend you follow these steps for a proper cleaning technique.
- Set your Jolt to the highest level (Red).
- Run 1 dry 20 second sesh
- Soak a Q-Tip in ISO and brush the atomizer head
- While running another 20 second sesh, brush the top of the coil head lightly
(Repeat steps as necessary)
- Next Remove the atomizer, remove your airpath cover on the body. You can do this by twisting the body to unthread the housing. Brush your airpath chamber with an ISO Q-Tip.
replacing your atomizers is inevitable and suggested for premium flavor.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article